Light and scanning electron microscopic characterization of aflatoxins producing Aspergillus flavus in the maize crop.

Maize (Zea mays L.) is considered as one of the main cereals, used as a source of food, forage, and processed products. The loss of maize productivity is reported due to effect on roots, stalks, ears, and kernels mainly caused by many fungi. Among these fungal pathogens of maize, Aspergillus flavus (A. flavus) are the most prevalent that produces highly toxigenic aflatoxins that are highly carcinogenic to the consumers. The present study is confined to isolate and characterize the A. flavus from maize seeds for accurate identification that can be helpful for determination and management of aflatoxins in maize crop. Eighty stored seed samples of maize were collected from warehouses where seeds are stored for food and feeding purposes. For the isolation of A. flavus, Potato Dextrose Agar was used. Isolated fungi were identified macro and microscopically using light microscope and scanning electron microscope. A total of 212 Aspergillus isolates were identified based on macro-morphological and micro-morphological characteristics. The results showed that A. flavus colonies were granular, flat with yellow-green to deep yellow-green colony color having a white border and compact, spherical spore heads. Rapid rate of growth was observed maturing in about 3-5 days. In microscopic features, A. flavus have apically swollen conidiophores with various conidia bearing cells in long and dry chains. Spherical conidial heads were split into several columns ranging 300-400 µm in diameter. This will be helpful for farmers, researchers and traders in future for correct identification of sources of aflatoxins. RESEARCH HIGHLIGHTS: Maize seed samples were collected from Pothohar region of Pakistan. The fungi were isolated on PDA. Aspergillus flavus was identified macro-morphologically by observing growth rate, colony color and texture. Furthermore, these fungi were identified micro-morphologically by using light and scanning electron microscope. The 212 Aspergillus flavus strains were isolated and identified.

Morpho-palynological and anatomical studies in desert cacti (Opuntia dillenii and Opuntia monacantha) using light and scanning electron microscopy.

Opuntia is the most diverse and widely distributed drought resistant promising genus of family Cactaceae. The cladodes were utilized to quantify the chemical composition of these plants helpful in lignocellulose conversion and their application towards biofuel production. The present study was aimed to evaluate and compare the taxonomic relationship based on morphology, stem anatomy and palynology of important desert cacti including Opuntia dillenii and Opuntia monacantha. This study also evaluates the potential usefulness of morphological, anatomical and pollen traits using light and scanning electron microscopy. The obtained microcharacters of stem and flowers are considered diagnostic at the generic and specific levels. Some distinguishing morphological features observed were elliptical to obovate cladodes, 1-7 spines per areole and presence of glochidia in O. dillenii. Pollen and stem anatomical characters of the studied taxa are considered highly diagnostic at the generic and species levels. The epidermis has irregular and wavy cells, with straight to sinuate wall pattern and paracytic stomata. Pollen grains appear as pantoporate and prolate spheroidal having reticulate to perforate-reticulate sculpturing while exine semi-tectate to tectate. The taxonomic features studied could be valuable to elaborate and helpful in correctly identification of Opuntia species. The methods of diverse microscopic examination also providing sufficient evidence about the taxonomy of the Opuntia species. RESEARCH HIGHLIGHTS: Description and illustration of desert cacti Opuntia. Morpho-anatomy and palynology were studied with LM and SEM. Highly variation in taxonomic qualitative and quantitative features. Systematic significance based on taxonomic characters was presented.

Micro-morphological diversity of pollen among Asteraceous taxa from Potohar Plateau-Pakistan.

Microscopic pollen characters from 19 species of family Asteraceae collected from different areas of the Potohar Plateau of Pakistan have been investigated using light and scanning electron microscopy. This study uses microscopic techniques to provide detailed information on pollen and its exine structure based on qualitative and quantitative characters. The present study has observed three types of pollen grains based on their apertures, that is, trizonocolporate, tetrazonocolporate, and tricolporate. Exine sculpturing is echinate in all studied taxa. Some species also exhibit Lacunae which differ in their shape and sizes. The size of the spines and the number of spines between the colpi play a vital role in differentiating the species of the same genus. Pollen fertility ranges from 94.3 to 74.19, showing that these species are well established in the study area. For the correct identification of species, a light and scanning electron microscopy was used that provides sufficient information for a taxonomist to distinguish species taxonomically. RESEARCH HIGHLIGHTS: Light and Scanning electron microscope is comparatively used to investigate the pollen characters of some species of the family Asteraceae. A scanning electron microscopy is used to study the micro-morphological characters of pollen grains. Qualitative and quantitative characters of pollen were studied.

Pollen morphology of selected melliferous plants and its taxonomic implications using microscopy.

This research aimed to explore the melliferous bee flora pollen from arid zones of District Attock, Islamabad Capital and Rawalpindi. Morpho-palynological features has provided key information for the classification and help to explain the taxonomy of several genera and species. Therefore, in this work, we examined the morphological characters of pollen potentially to be used for the species delimitation of bee flora. A total of 18 bee floral species, classified into 12 different families were collected, pressed, identified and then acetolyized to observe the grains under microscopy. Bee pollen can be described by small, medium to large sized morphotypes presenting five types of shapes, prolate spheroidal in (seven species), sub-prolate (six species), oblate spheroidal (three species), oblate and prolate (one species each) was examined. The observed polar and equatorial diameter were found maximum in Zea mays 73.5 µm and Pelargonium inquinans 66.75 µm respectively. Pollen of six different types was found namely: tricolporate, 3-zonocolporate, monoportae, tetracolporate, tetraporate and mononsulcate. Whereas highest value of colpi length was measured in Grewia tenax (24.55 µm). Exine surface nature of pollen was examined echinate psilate and scabrate. Exine thickness noted to be maximum in Verbena tenuisecta (8.40 µm) and minimum in Citrus macrocarpa (0.4 µm). Bee floral species considered difficult to identify based on other morphological traits were successfully distinguished using pollen quantitative and qualitative traits, confirming the importance of pollen morphology to diagnose characters to correctly identify honeybee flora. RESEARCH HIGHLIGHTS: Pollen diversity among honeybee flora. Highly variations observed via microscopy in pollen micromorphology. Palyno-morph has taxonomic value for the identification of honeybee floral species.

Anatomical characterization of 18 commercially important varieties of Phoenix dactylifera L. by using microscopy.

Date palm (Phoenix dactylifera L.) is an important traditional crop having socioeconomic values. To best of literature review and our knowledge, there is a gap of taxonomic study on the role of morpho-anatomical features of date palm for correct identification of its varieties. With the advancement in the field of microscopy, anatomical features are considered very effective taxonomical markers. The present study was aimed to analyze the taxonomic variations using leaf epidermal anatomy and to highlight the importance of leaf epidermis to resolve identification ambiguities among the different varieties of date palms. The study includes analysis of leaf epidermal anatomy of 18 different commercial varieties of date palm collected from different areas of Pakistan. A diverse range of shape and size of epidermal cells, subsidiary cells, guard cells, stomata, stomatal pore was observed on abaxial as well as adaxial among studied date palm varieties via LM and found to be very helpful tool in discrimination of varieties. The shape of epidermal cells on both abaxial and adaxial surfaces varies including elongated, irregular, polygonal, curved, and spherical or sometime mixed of these. The values of stomatal indices on both surfaces showed wide variations.

Microscopic implication and evaluation of herbaceous melliferous plants of southern Khyber Pakhtunkhwa-Pakistan using light and scanning electron microscope.

The aim of the present study is to investigate the pollen morphology of melliferous plant taxa of Southern Khyber Pakhtunkhwa-Pakistan. Using light microscope (LM) and scanning electron microscope (SEM), the palynological study of 18 species of melliferous plants namely Calendula arvensis, Cenchrus pennisetiformis, Citrullus colocynthis, Cucumis melo subsp. agrestis var. agrestis, Cucurbita maxima, Cymbopogon jwarancusa, Cynodon dectylon, Dactyloctenium aegyptium, Helianthus annus, Lagenaria siceraria, Launaea procumbens, Luffa cylindrica, Pennisetum glaucum, Saccharum spontaneum, Sonchus asper, Verbesina encelioides, Xanthium strumarium, and Zea mays was carried out. Both qualitative and quantitative characteristics of pollen were studied. Variations were observed in pollen morphology. The dominant pollen shape was prolate-spheroidal (11 species). All the pollen units were monad. The highest exine thickness was found in Citrullus colocynthis (8.45 µm). The maximum polar and equatorial diameter (102 and 97.55 µm) was found in Luffa cylindrica. Similarly, the highest P/E ratio was found in Cucurbita maxima (1.46). Most of the species showed tricolpate and monoporate type of pollen. The exine sculpturing, number of spines per pollen and between colpi and the pollen fertility and sterility provided significant results for the documentation of melliferous plants. Thus, the information listed in this article will prove helpful to identify the potential melliferous plants in the area, geographical origin of the honey, and the availability of pure honey in the local and international market.

Quality assurance and authentication of herbal drug (Argyrolobium roseum and Viola stocksii) through comparative light and scanning electron microscopy.

The quality assurance and authentication of crude herbal drugs play important role in the effective therapeutic effect of herbal drug and their products. There are many reported problems in quality assurance of herbal crude drugs concerning to their correct identification. The present study was designed with the aim to document the authentication and quality assurance of the herbal crude drugs (Argyrolobium roseum and Viola stocksii) thorough light microscopy (LM) and scanning electron microscopy (SEM). The detailed foliar anatomical studies showed polygonal epidermal cells having anticlinal walls in Argyrolobium roseum while rounded epidermal cells were observed in Viola stocksii. The anomocytic stomata type was observed in Argrolobium roseum while actinocytic was noticed in Viola stocksii. The pollen of studied species appeared as tricolporate showing reticulate exine sculpturing in Argrolobium roseum while fine perforations were recorded in Viola stocksii. Furthermore, quantitative analysis of phenols, flavonoids, and antioxidant activity showed high flavonoid and phenol content in Argyrolobium roseum as compared with Viola stocksii. It was observed that Argyrolobium roseum was discriminated from the Viola stocksii based on the leaf and pollen micromorphological traits by using LM and SEM techniques. It was concluded that LM and SEM techniques were found useful for the quality assurance of botanicals and their authentication.

Prevalence of Acute Coronary Syndrome and Various Risk Factors in Acute Stroke Patients.

Background Stroke is the second leading cause of death worldwide after acute coronary syndrome (ACS). Both diseases share many risk factors such as hypertension, diabetes, dyslipidemia, and smoking. Patients who experience acute coronary syndrome are at heightened risk of recurrent ischemic events such as ischemic strokes, one of the most feared cardiovascular events because of the risk of long-term disability. We tried to estimate the prevalence of underlying ACS among patients with acute stroke. Methods This cross-sectional study was done at the CPE Institute of Cardiology, Pakistan, and Nishtar Medical University and Hospital, Pakistan. A total of 160 acute stroke cases were selected by consecutive sampling technique and questionnaire forms were filled. Detailed history, investigations, and physical examinations were done. The primary outcome was the prevalence of ACS and secondary outcomes were the prevalence of hypertension, smoking, dyslipidemia, diabetes mellitus, and previous history of stroke in stroke patients. Results Most of the patients that presented to us were above 50 years of age with the mean age of 62 years (SD = 9.23 years). Male predominance was seen with a total of 115 (72%) cases. Out of 160 patients, 91 (57%, p < 0.05) had underlying ACS, with 45 cases (49%) with unstable angina, 20 (22%) with non-ST-elevation myocardial infarction (NSTEMI), and 26 (29%) with ST-elevation myocardial infarction (STEMI). Prevalence of risk factors in 160 cases were, hypertension (101, 63%), lack of exercise (91, 57%), smoking (70, 44%), diabetes mellitus (61, 38%), dyslipidemia (50, 31%). All these results were statistically significant (p < 0.05). Prevalence of obesity (35, 22%) and previous stroke history (19, 12%) was statistically insignificant (p > 0.05). Conclusion Acute coronary syndrome is still frequently present in patients with acute stroke. The need of the hour is to manage ACS efficiently so that its deadly complications such as stroke can be prevented.

Comparative foliar anatomical and pollen morphological studies of Acanthaceae using light microscope and scanning electron microscope for effective microteaching in community.

In this study, foliar anatomy and pollen morphology of 10 species of Acanthaceae has been investigated using light and scanning electron microscopy. The study was aimed to highlight the role of microscopy in microteaching at community for proper characterization of plants using palyno-anatomical characters including pollen type, exine sculpturing, shape of epidermal cells, pattern of anticlinal wall, type and size of stomata, and trichome. Most of the species have polygonal cell shapes but some species have irregular, tetragonal, and pentagonal shape of epidermal cells. The largest epidermal cell length on adaxial and abaxial surface were observed in Asystasia gangetica 66.95 and 87.40 µm whereas least was observed on adaxial surface in Justicia adhatoda 36.9 µm and on abaxial surface in Barleria cristata 35.65 µm. In anatomy, species have diacytic type of stomata, whereas stomata of paracytic type observed in two species, while in A. gangetica cyclocytic type of stomata are present. Quantitively on abaxial surface, largest stomata length 29.9 µm and width 24.30 µm was noted in B. cristata. While shortest stomata length was observed in Ruellia prostrata 25.95 µm whereas minimum width of stomata was examined in Barleria acanthoides 2.05 µm. The diversity of trichomes are present in all species except in Ruellia brittoniana. Acanthaceae can be characterized by exhibiting different pollen morphology having five types of pollen shapes, prolate, spheroidal, perprolate, subprolate, and oblate spheroidal. Exine peculiarities showing variations such as reticulate, granulate, coarsely reticulate, lophoreticulate, perforate tectate, and granulate surface were examined.

Prevalence and treatment of neurological and psychiatric disorders among tertiary hospitals in Pakistan; findings and implications.

INTRODUCTION: Mental health and neurological disorders are prevalent in Pakistan. However, there are considerable concerns with their management due to issues of access, availability of trained personnel and stigma alongside paucity of such data. Consequently, there is a need to document current treatment approaches starting with tertiary hospitals in Pakistan where patients with more severe mental and neurological disorders are typically treated. Subsequently, use the findings to help direct future policies and initiatives. METHODS: Multi-centered, cross-sectional, prospective study principally evaluating current medicine usage among patients attending tertiary hospitals in Pakistan with psychiatric and neurological disorders. In addition, possible factors contributing to the prevalence of these disorders in this population to help with future care. All 23 tertiary care hospitals in the ten major Districts in Pakistan were included, which cover 75% of the population. RESULTS: 57,664 patients were evaluated of which 35.3% were females. Both females and males had multiple brain disorders and multiple co-morbidities. Schizophrenia was the most prevalent disorder overall among both females (25.2%) and males (30.4%). A median of six medicines were prescribed per patient, with antipsychotics and antidepressants the most prescribed medicines. Clozapine was the most prescribed medicine in males (12.25%) and females (11.83%) including for psychiatric disorders, with sodium valproate the most prescribed medicine in epilepsy in males (42.44% of all anti-epileptic medicines) as well as females (46.38%). There was a greater prevalence of both disorders among the lower classes. A greater prevalence of schizophrenia was seen in patients abusing alcohol and smokers. The divorce rate was higher among the studied patients and the prevalence of depression was higher among the widowed population. CONCLUSIONS: There were concerns with the quality of prescribing including the extent of polypharmacy as well as possible overuse of clozapine especially in patients with epilepsy, both of which need addressing.

Effect of Cereclor as Rejuvenator to Enhance the Aging Resistance of Reclaimed Asphalt Pavement Binder.

Asphalt is the most commonly used material for pavement construction around the world, and therefore, it is vital to acquaint a practice that restores the reclaimed asphalt pavement (RAP) binder properties to the required level of performance by adding proper rejuvenators. However, a rejuvenator may perform better in the early stages of its application but may not necessarily perform better in the long run. The aim of this study is to assess the rejuvenation effect on the aging resistance of RAP binder in long-life performance through applying artificial aging. In this study, base virgin binder of pen grade 60/70 and RAP binder rejuvenated with Cereclor were subjected to artificial aging to simulate the short- and long-term aging effects. Penetration, softening point, ductility, and viscosity; saturates, aromatics, resins, and asphaltene (SARA) fractionation; and Fourier-transform infrared (FTIR) spectroscopy, bending beam rheometer (BBR), and dynamic shear rheometer (DSR) tests were conducted to evaluate the potential improvements in various properties of RAP binder. The results indicated that the physical, fractional composition, rheological, and aging resistance of RAP binder improved through the rejuvenation mechanism. Therefore, the rejuvenator improved the chemical structure through re-balancing the constituents in the colloidal system, even after long-term re-aging, which proves it to be an aging-resistant binder. Furthermore, it has been concluded that Cereclor has substantial rejuvenation potential even after applying artificial aging, and it can be utilized in pavement recycling to achieve long-life performance. Furthermore, the results depict good correlations between the physical, rheological, and chemical parameters of virgin and RAP binder.

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy.

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 µm while minimum in M. compressa 38.42 and 21.05 µm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus-indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro-echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.

Comparative pollen and foliar micromorphological studies using light microscopy and scanning electron microscopy of some selected species of Lamiaceae from Alpine Zone of Deosai Plateau, Western Himalayas.

The study was conducted to highlight a detailed account of morphology of pollen chosen species of Lamiaceae through scanning electron microscopy, and the anatomical characteristics of leaf epidermis of seven species using simple light microscopy. In results, Anisomeles indica and Otostegia aucheri belong to subfamily Lamioideae because it has tricolpate pollen while the rest eight species belong to subfamily Nepetoideae (hexacolpate pollen). The exine sculpturing of pollen of studied species was found to be reticulate. In the family Lamiaceae, four kinds of stomata were found anomocytic, anisocytic, diacytic, and actinocytic, respectively. The cell wall patterns of epidermal cells were irregular or polygonal with straight or undulate walls. It was noted that the variety of the epidermal trichomes seems of taxonomically important for the identification of species of Lamiaceae. Both nonglandular and glandular trichomes were analyzed. The nonglandular trichomes were characterized with long, thin, and pointed apical unicellular cells. The nonglandular trichomes were A-shaped in Thymus linearis. In Perovskia abrotanoides, stellate glandular trichomes were observed whereas in A. indica and Mentha royleana both glandular and nonglandular trichomes were found. In A. indica, the nonglandular trichomes were sessile and peltate in M. royleana. For the first time in this study, pollen and foliar micromorphological features of selected species of this area are carried out. These taxonomic characters were found to be important in discrimination of species from each other. In future, the detailed study with comprehensive morphology coupled with other important characters is required for delimitation of taxa at various levels.

Foliar epidermal anatomy of some selected wild edible fruits of Pakistan using light microscopy and scanning electron microscopy.

The present study is focused on the detailed foliar epidermal anatomy of some selected wild edible fruits (WEFs) from Pakistan using light microscopy (LM) and scanning electron microscopy (SEM). The studied species are Ficus racemosa L., Solanum nigrum L., Capparis spinosa L., Physalis divaricata D.Don, Rosa moschata Herrm. and Ribes orientale Desf. collected from various localities of Pakistan. The objective of the present study is to investigate qualitative and quantitative anatomical characters for the identification and differentiation of collected wild edible fruits. The characters studied are shape and size of epidermal cells, anticlinal wall pattern, trichome type and shape, average number of stomata, length and width of stomata and pore. The detailed microscopic investigation and variations in the characters recorded have a key role in the determination and authentication of wild edible fruits. This study possesses great potential for plant taxonomists to further evaluate the species at molecular and genetic levels.

Pollen micromorphological analysis of tribe Acacieae (Mimosaceae) with LM and SEM techniques.

The morphology of pollen grains of the 06 species of tribe Acacieae (Mimosaceae) belonging to one genus were investigated using scanning electron microscopic (SEM) and light microscopic (LM) approach. Lactic acid acetolysis method was used for (LM) while non-acetolysis for (SEM). The species were examined for the both qualitative and quantitative palynological features. Qualitatively the pollen was studied for the shape, exine sculpturing, pollen shape, and pollen type. Oblate spheroidal shape of pollen was observed in Accacia modesta. Subprolate shape in Accaca nilotica. In Accacia farnesiana, prolate pollen was examined while prolate spheroidal in Acacia tortilis and spheroidal pollen grains were studied in Acacia catechu, respectively. Pollen exine sculpturing of the studied tribe possesses novel variation. Foveolate, reticulate, foveolate-psilate, faint reticulate, fossulate, perforate, and scrabate exine sculpturing were noticed. Colpi were absent in all species. Excessive variation was observed in both qualitative and quantitative character of pollen. SPSS software was use for the quantitative measurement of the pollen grains. The current study will be helpful for the identification of the problematic species and phylogenetic studies of family Mimosaceae.

Light microscopy and scanning electron microscopy: Implications for authentication of misidentified herbal drugs.

Plant-based drugs have reached remarkable acceptability as therapeutic remedy for various diseases due to the adverse effects of contemporary medicines. This increasing popularity of herbal drugs leads to a growing herbal market for the development of plant-based drugs, nutraceuticals, pharmaceuticals and cosmeceuticals. Herbal drug adulteration is a complex problem which currently has undeniable consequences on health and nutrition. Ambiguities in nomenclature, misidentification and resemblance of colour and texture of the crude herbal drugs are the major causes of adulteration. Three different species commercially marketed under the same trade name Halion are Lepidium apetalum, Asparagus officinalis, and Lepidium didymum. The genuine source of Halion is Lepidium apetalum, which is authenticated by using basic and advanced taxonomic techniques. Morphology, anatomy and palynology of the misidentified sources were done using light and scanning electron microscopic techniques for authentication. This study may help to set microscopic techniques as a tool to achieve quality and standardization of the genuine source of the herbal drug. Phytochemical analysis and biological screening is needed for the further establishment of authenticity and quality of herbal drugs.

Comparative light and scanning electron microscopy in authentication of adulterated traded medicinal plants.

The medicinal plants are utilized globally considering the cheap and chemical free source, but their correct identification and authentication is prerequisite for safety and efficacy of plant-based medicines. The present study encompassed traded medicinal plants (16) with high therapeutic value from diverse families like Brassicaceae, Berberidaceae, Malvaceae, Salicaceae, Myrtaceae, Papilionaceae, Ascelpiadaceae, Colchicaceae, Violaceae, and Vitaceae for detailed microscopic study of characters that is, morphology, pollen shape and sizes, P/E ratio, pore length and width, spine length, colpi dimensions, and exine sculpture pattern. The plants showed noteworthy differences in microscopy of Wattakaka volubilis having pollinia, translator and corpusculum like structures while pores were visible in Colchicum luteum, Alcea rosea, and Hibiscus syriacus. The spines were observed in Centipeda minima, A. rosea, and H. syriacus being dimorphic spines in A. rosea and monomorphic in H. syriacus. The exine sculpturing pattern was reticulate in mostly studied plants however distinctive exine pattern was noted in Berberis aristata and Berberis lyceum. The highest polar diameter, equatorial diameter and exine thickness among studied plants were observed in H. syriacus (161 µm), C. luteum (50 µm) and Vitis jacquemontii (1.10), respectively. Thus, microscopy of medicinal plants in addition to other taxonomic evidence offers a supportive skill in authentication, consequently utilization by local consumers and pharmaceutical industries.

Microscopic and phytochemical techniques as a tool for authentication of herbal drug chiraita: Swertia cordata (G. Don) C.B. Clarke.

Swertia cordata (G. Don) C.B. Clarke is one of the potential medicinal plants extensively used in eastern traditional medicine such as Unani, Ayurveda, Siddha, and in traditional Tibetan and Chinese medicine. S. paniculata is the common adulterant of S. cordata at herbal shops and markets but S. paniculata is also used in number of herbal formulations. The present study was conducted to use microscopic, pharmacognostic, and phytochemical techniques as a tool for the authentication of herbal drug chiraita (S. cordata). In herbal markets, mixing, adulteration, and use of spurious materials as substitute have become a major concern for herbal practitioners, local user, and industry for reasons of safety and efficacy. Therefore, authentication of medicinal plants is of utmost importance at each level of drug research. In the present study, anatomical features of two species showed a great diversity, as irregular epidermal cells and nonglandular, unicellular trichomes were found in S. cordata while in S. paniculata epidermal cells were hexagonal in shape and trichomes were A-shaped. Antioxidant activity of two species showed a great variation where IC50 value recorded for S. cordata was 208 µg/mL, while for S. paniculata IC50 was 624 µg/mL. The study can serve as an important source of information to achieve the authenticity and to evaluate the quality and purity of the plant material in accordance to WHO guidelines. As this species is greatly exploited, so conservation is highly recommended.

Microscopic investigation of palyno-morphological features of melliferous flora of Lakki Marwat district, Khyber Pakhtunkhwa, Pakistan.

The present study was carried out to investigate the polliniferous bee flora of Lakki Marwat district, Khyber Pakhtunkhwa, Pakistan. A total of 18 species, belonging to 13 different families were identified for the foraging activities of honeybees, namely, Cenchrus biflorus, Cestrum nocturnum, Citrus limon, Combretum indicum, Datura innoxia, Duranta erecta, Hamelia patens, Helianthus annuus, Ipomoea cairica, Luffa aegyptiaca, Nerium oleander, Ocimum basilicum, Parthenium hysterophorus, Pennisetum typhoides, Prosopis cineraria, Prosopis juliflora, Saccharum spontaneum, and Ziziphus jujuba. The identified melliferous flora was collected for the morpho-palynological investigation. Pollen were acetolyzed, measured, and described qualitatively using light microscopy. The pollen types varied from psilate to echinate and colpi from tricolpate to hexacolpate. Quantitative characteristics including polar diameter, equatorial diameter, polar to equatorial ratio, colpi length, colpi width, spine length, spine width, and exine thickness of the pollen were determined and analyzed statistically using software IBM SPSS Statistics 20. The results of the present study highlighted the significance of pollen morphology of the bee flora of the area which may lead to the identification of the potential and useful botanical sources for beekeepers and to check the honey quality marketed from the study area.

Authentication of herbal drug Tukhm-e-balango (Lallemantia royleana Benth.) using microscopic, pharmacognostic, and phytochemical characterization.

The study is aimed to provide a comprehensive account on authentication of herbal drug named as Tukhm-e-balango (Lallemantia royleana Benth.) from the seeds of Ocimum basilicum by using microscopic, pharmacognostic, and phytochemical characterization. The crude medicinal plants and their parts are often adulterated or substituted in market due to improper identification by the consumers while among herbal plant sellers, taxonomic confusion is caused due to morphological similarities of the plant parts and lack of a standard identification system.In microscopy, both herbarium and fresh specimens were studied using qualitative and quantitative morphological characteristics of leaves, seeds, and pollen. For pharmacognosy, solubility, fluorescence, and physicochemical characterizers were analyzed whereas a total phenolic and flavonoids contents was determined in addition to DPPH radical scavenging activity. In current study, microscopic, pharmacognostic, and phytochemical characterization clearly differentiated L. royleana from O. basilicum. The major problem in herbal drug industry is caused due to confusion and controversy of certain synonyms used for more than one or two drugs. Sometimes, under the same common or local name, entirely different taxa are being sold in herbal markets. It is concluded that correct and proper identification of medicinal plants is very crucial to ensure the safety and efficacy of herbal medicines, as many medicinal plants are intentionally or unintentionally adulterated with similar species or varieties. In herbal market, the seeds of L. royleana are adulterated with seeds of O. basilicum due to their similar morphology.